Gayar now has an application
Download it now
Customer Service
22274775
prev
next
prev
next
Brodit Passive Holder Adjustable For Tablets
Brodit Passive Holder Adjustable For Tablets
With your iPad Pro in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. Brodit Proclip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, Brodit Proclip is not designed for large devices like tablets. In some vehicles the Brodit Proclip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Brodit Proclip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations
Description
Brodit Passive Holder Adjustable For Tablets With your iPad Pro in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car. Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. Brodit Proclip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, Brodit Proclip is not designed for large devices like tablets. In some vehicles the Brodit Proclip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Brodit Proclip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations
Specifications
Technical specifications
Length/Width
N/A
Other specifications
Warranty
months
Length
cm
Width
cm
Height
cm
Weight
kg
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
Related Products
- Brodit Active Holder With USB-Cable And Cig-Plug Adapter For Samsung Galaxy Note 75-89mm
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto Brodit Proclip Mounting Platform.
Availability: In Stock
35.000 KWD
- Brodit Active Holder Type C With Charge
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto Brodit Proclip Mounting Platform.
Availability: In Stock
35.000 KWD
- Brodit Magnetic Wireless Charger With Support And Tilt Swivel
Keep your iPhone battery fully charged in a mount with Magnetic wireless charger, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. The iPhone is held securely in place in an upright position for maximum cellular reception. The Mount is equipped with an support under the device.
Important Note: This product is not compatible for Magsafe devices fitted in a standard case/skin without a Magsafe ring.
The mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Brodit Proclip mounting platform.
Availability: In Stock
35.000 KWD
- Brodit Active Holder With CIG Plug IPhone 12 Pro Max
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Brodit Proclip mounting platform.
Availability: In Stock
35.000 KWD
- Brodit Passive Holder For 12 13 Pro - Max
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
Fits devices with standard sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 70-83 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
16.000 KWD
- Brodit Passive Holder Adjustable For IPhone X 11 12 Pro ProMax And Plus
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
Fits devices with standard sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
16.000 KWD
- Brodit Passive Holder Adjustable For IPhone 6 8 X
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. The iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
15.000 KWD
- Brodit Passive Holder For Cable Attachment - Iphone Xs
NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder, and to slide it STRAIGHT UPWARD out of the holder.
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it automatically connects to your iPhone every time you place the device in the holder.
Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB C Adapter Cable (Apple article. no.MK0X2AM/A).
Fits devices with skin that has the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
25.000 KWD
- Brodit Passive Holder Adjustable For Tablets
Adjustable passive holder with tilt swivel for devices with or without skin/case. This holder is crash tested and approved for use with device without skin/case on Brodit's headrest mount. Keep your device in a holder in your car and you will always have it within easy sight and reach. Safe, neat and convenient!
Measure your device/skin/case and compare with the holder specifications to choose the right product for you. This holder fits for devices with or without skin/case with the height 140-195 mm and maximum thickness 25 mm.
You can attach a charging cable to your device in order to get charging while in the holder. The holder is equipped with a tilt swivel and can easily be adjusted in order to avoid light reflection.Tilts 20° and swivels 360°. The upper and lower parts of the holder have padded cushions for protection against sliding and scratching. It is easy to place the device in the holder, and to take it with you when leaving the car. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden
Crash tested:
This adjustable holder is crash tested according to standard for car seats (ECE R17). The crash test applies for a tablet that weighs 490 g. The tests have been performed on one seat with invisible headrest pins (type Volvo etc.) and one seat with visible headrest pins (type Ford etc.) in the forward and rearward directions. The adjustable holder keeps the tablet in place during all executed tests.
Dimensions: 164 x 148 x 69 mm (W x H x D mm)
Weight: 187 g
Important information:
Tablets should not be installed onto a car’s dashboard. They may block the view or key controls and the Brodit Proclip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Brodit Proclip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets in a holder on the car’s headrest, installed onto a Brodit headrest mount.
Availability: In Stock
23.000 KWD
- Brodit Passive Holder With Tilt Swivel For APPLE I Pad Pro 11
With your iPad Pro in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. Brodit Proclip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, Brodit Proclip is not designed for large devices like tablets. In some vehicles the Brodit Proclip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Brodit Proclip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Availability: In Stock
19.000 KWD
-
CTEK USB-C Charger 40-464
Suitable for use with CTEK charger CS Free.
Manufactured by CTEK, Scandinavia’s largest producer and developer of smart battery chargers and EV charging solutions. Designed in Sweden
Availability: In Stock
12.500 KWD
- Victron Energy Blue Smart IP65 Charger12V - 7A
Blue Smart IP65 Charger (120V and 230V)
Charger
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
New: IP65 12/5 replaced by smaller equivalent model: IP65s 12/5
Models
12V 4/5/7/10/15A, 24V 5/8A
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Availability: In Stock
54.000 KWD
- Victron Energy Blue Smart IP65 12V - 15A
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Severe cold performance: down to -30°C
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth Smart
Availability: In Stock
65.000 KWD
- Victron Energy Carry Case For Blue Smart IP65 Chargers
Smart and professional; this new snap shut carry case provides protective stowage and easy transport for your Blue Smart IP65 charger, and its accessories.
Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options.
(Charger and accessories not included)
Availability: In Stock
17.000 KWD
- Victron Energy Orion-TR Smart 12 or v12-30A DC-DC
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55C with a full rated output up to 40C
Availability: In Stock
105.000 KWD
- WEATHERTEC Cupfone XL Universal Portable Holder
The adjustable phone holder fits almost all popular current cell phones, including phones with regular sized protective cases. Fully adjustable tilt and swivel let you easily see your favorite app like Navigation or Waze when you're on the road. Makes hands-free voice commands easy to use with hands-free phone calls. It allows you to leave your phone plugged in while it's in the holder and you can easily, with one hand, remove or replace your phone from the holder without having to disconnect your charging cord. You'll never have to search for your mobile phone again, because you always know where it is. Allows you to keep your hands on the wheel and your eyes on the road while conveniently using your phone's hands-free features
Availability: In Stock
16.900 KWD
- WEATHERTEC Cupfone Universal Portable Holder
WeatherTech CupFone cell phone holders are durable, convenient, and easy to use. These fully adjustable cell phone holders fit snugly into your vehicle’s cup holders, keeping your mobile device visible and easily accessible. CupFones make hand-free voice commands and calls easier, and keep you safer—with your hands on the wheels and your eyes on the road. Select the model with features you prefer.
FEATURES
Designed using interchangeable base cups, allowing you to customize the perfect snug fit
Can also be adjusted to fit recreational vehicles, boats, golf carts, and more
Base allows phone to rotate 360 degrees; adjustable for viewing from any seat position
Phone holder tilts with full range of motion to allow proper angle of microphone and speakers
Knob tightens easily and securely locks position
Adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases
Open access bottom lets you easily charge your mobile device while it’s in place
be used in multiple vehicles, or on your desk—and it’s great for rental cars
100 percent designed, engineered, and manufactured by WeatherTech
Availability: In Stock
15.900 KWD
- Brodit Active Holder IPhone 6 8 X 11Pro
NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder, and to slide it STRAIGHT UPWARD out of the holder.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12-24 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
Length of charging cable: 123 cm.
Availability: In Stock
35.000 KWD
- Active Holder IPhone Pro Max
OTE! It is important to slide the device STRAIGHT DOWNWARD into the holder, and to slide it STRAIGHT UPWARD out of the holder.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
Length of charging cable: 123 cm.
Availability: In Stock
35.000 KWD
- Brodit Active Holder With USB-Cable And Cig-Plug Adapter For Samsung Galaxy Note 75-89mm
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto Brodit Proclip Mounting Platform.
Availability: In Stock
35.000 KWD
- Brodit Active Holder Type C With Charge
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto Brodit Proclip Mounting Platform.
Availability: In Stock
35.000 KWD
- Brodit Magnetic Wireless Charger With Support And Tilt Swivel
Keep your iPhone battery fully charged in a mount with Magnetic wireless charger, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. The iPhone is held securely in place in an upright position for maximum cellular reception. The Mount is equipped with an support under the device.
Important Note: This product is not compatible for Magsafe devices fitted in a standard case/skin without a Magsafe ring.
The mount is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Brodit Proclip mounting platform.
Availability: In Stock
35.000 KWD
- Brodit Active Holder With CIG Plug IPhone 12 Pro Max
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Brodit Proclip mounting platform.
Availability: In Stock
35.000 KWD
- Brodit Passive Holder For 12 13 Pro - Max
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
Fits devices with standard sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 70-83 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
16.000 KWD
- Brodit Passive Holder Adjustable For IPhone X 11 12 Pro ProMax And Plus
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
Fits devices with standard sized skins (not rugged or slim size). Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
16.000 KWD
- Brodit Passive Holder Adjustable For IPhone 6 8 X
Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. The iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
Fits devices with skin that has the following dimensions: Width: 62-77 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
15.000 KWD
- Brodit Passive Holder For Cable Attachment - Iphone Xs
NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder, and to slide it STRAIGHT UPWARD out of the holder.
This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it automatically connects to your iPhone every time you place the device in the holder.
Note! Cable not included.
The cable attachment holder can be combined with Apple original Lightning to USB C Adapter Cable (Apple article. no.MK0X2AM/A).
Fits devices with skin that has the following dimensions: Width: 70-83 mm, Thickness: 2-10 mm. (May fit for skins thicker than 10 mm, depending on shape/design of the edges).
Availability: In Stock
25.000 KWD
- Brodit Passive Holder Adjustable For Tablets
Adjustable passive holder with tilt swivel for devices with or without skin/case. This holder is crash tested and approved for use with device without skin/case on Brodit's headrest mount. Keep your device in a holder in your car and you will always have it within easy sight and reach. Safe, neat and convenient!
Measure your device/skin/case and compare with the holder specifications to choose the right product for you. This holder fits for devices with or without skin/case with the height 140-195 mm and maximum thickness 25 mm.
You can attach a charging cable to your device in order to get charging while in the holder. The holder is equipped with a tilt swivel and can easily be adjusted in order to avoid light reflection.Tilts 20° and swivels 360°. The upper and lower parts of the holder have padded cushions for protection against sliding and scratching. It is easy to place the device in the holder, and to take it with you when leaving the car. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden
Crash tested:
This adjustable holder is crash tested according to standard for car seats (ECE R17). The crash test applies for a tablet that weighs 490 g. The tests have been performed on one seat with invisible headrest pins (type Volvo etc.) and one seat with visible headrest pins (type Ford etc.) in the forward and rearward directions. The adjustable holder keeps the tablet in place during all executed tests.
Dimensions: 164 x 148 x 69 mm (W x H x D mm)
Weight: 187 g
Important information:
Tablets should not be installed onto a car’s dashboard. They may block the view or key controls and the Brodit Proclip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Brodit Proclip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets in a holder on the car’s headrest, installed onto a Brodit headrest mount.
Availability: In Stock
23.000 KWD
- Brodit Passive Holder With Tilt Swivel For APPLE I Pad Pro 11
With your iPad Pro in a holder attached in your car you will always have it within easy reach in the car. Safe, neat and convenient! You can connect e.g. a charging cable to the surfpad when it is in the holder.
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the surfpad into place in the holder, and to take it with you when leaving the car.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls. Brodit Proclip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, Brodit Proclip is not designed for large devices like tablets. In some vehicles the Brodit Proclip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the Brodit Proclip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
Availability: In Stock
19.000 KWD
-
CTEK USB-C Charger 40-464
Suitable for use with CTEK charger CS Free.
Manufactured by CTEK, Scandinavia’s largest producer and developer of smart battery chargers and EV charging solutions. Designed in Sweden
Availability: In Stock
12.500 KWD
- Victron Energy Blue Smart IP65 Charger12V - 7A
Blue Smart IP65 Charger (120V and 230V)
Charger
The Blue Smart IP65 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
New: IP65 12/5 replaced by smaller equivalent model: IP65s 12/5
Models
12V 4/5/7/10/15A, 24V 5/8A
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Availability: In Stock
54.000 KWD
- Victron Energy Blue Smart IP65 12V - 15A
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Benefits
The battery is charged, smartly… to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Features
Water, dust and chemical resistant
Seven step smart charge algorithm
Recovery of fully discharged ‘dead’ batteries
Automatic power supply function
Severe cold performance: down to -30°C
Several other battery life enhancing features
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth Smart
Availability: In Stock
65.000 KWD
- Victron Energy Carry Case For Blue Smart IP65 Chargers
Smart and professional; this new snap shut carry case provides protective stowage and easy transport for your Blue Smart IP65 charger, and its accessories.
Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options.
(Charger and accessories not included)
Availability: In Stock
17.000 KWD
- Victron Energy Orion-TR Smart 12 or v12-30A DC-DC
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55C with a full rated output up to 40C
Availability: In Stock
105.000 KWD
- WEATHERTEC Cupfone XL Universal Portable Holder
The adjustable phone holder fits almost all popular current cell phones, including phones with regular sized protective cases. Fully adjustable tilt and swivel let you easily see your favorite app like Navigation or Waze when you're on the road. Makes hands-free voice commands easy to use with hands-free phone calls. It allows you to leave your phone plugged in while it's in the holder and you can easily, with one hand, remove or replace your phone from the holder without having to disconnect your charging cord. You'll never have to search for your mobile phone again, because you always know where it is. Allows you to keep your hands on the wheel and your eyes on the road while conveniently using your phone's hands-free features
Availability: In Stock
16.900 KWD
- WEATHERTEC Cupfone Universal Portable Holder
WeatherTech CupFone cell phone holders are durable, convenient, and easy to use. These fully adjustable cell phone holders fit snugly into your vehicle’s cup holders, keeping your mobile device visible and easily accessible. CupFones make hand-free voice commands and calls easier, and keep you safer—with your hands on the wheels and your eyes on the road. Select the model with features you prefer.
FEATURES
Designed using interchangeable base cups, allowing you to customize the perfect snug fit
Can also be adjusted to fit recreational vehicles, boats, golf carts, and more
Base allows phone to rotate 360 degrees; adjustable for viewing from any seat position
Phone holder tilts with full range of motion to allow proper angle of microphone and speakers
Knob tightens easily and securely locks position
Adjustable phone holder fits virtually all known mobile phones, including those with normal sized protective cases
Open access bottom lets you easily charge your mobile device while it’s in place
be used in multiple vehicles, or on your desk—and it’s great for rental cars
100 percent designed, engineered, and manufactured by WeatherTech
Availability: In Stock
15.900 KWD
- Brodit Active Holder IPhone 6 8 X 11Pro
NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder, and to slide it STRAIGHT UPWARD out of the holder.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12-24 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
Length of charging cable: 123 cm.
Availability: In Stock
35.000 KWD
- Active Holder IPhone Pro Max
OTE! It is important to slide the device STRAIGHT DOWNWARD into the holder, and to slide it STRAIGHT UPWARD out of the holder.
Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.
The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.
Length of charging cable: 123 cm.
Availability: In Stock
35.000 KWD
- Brodit Active Holder With USB-Cable And Cig-Plug Adapter For Samsung Galaxy Note 75-89mm
Keep your phone in a holder when on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The active holder charges your phone when it is placed in the holder. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle. This holder comes with a USB Type C charging cable. Fits phones with USB Type C charging inlet only.
The adjustable holder fits for devices with and without skin with the following dimensions: Width: 75-89 mm, Thickness: 6-10 mm. Adjustable holders come in various sizes. Measure your device and compare with the holder specifications in order to make sure you have chosen the correct product (if you are using a skin: measure the device with the skin in place).
Before using the holder you need to set the holder's width so it suits your device, then your phone is held firmly in place in an upright position for maximum cellular reception. The holder has a neat and discreet design which blends well with the vehicle's interior.
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto Brodit Proclip Mounting Platform.
Availability: In Stock
35.000 KWD
prev
next