Gayar now has an application
Download it now
Customer Service
22274775
VICTRON ENERGY
Choose your vehicle
Vehicle Type
Car
Vehicle Make
Vehicle Model
Vehicle Generation
Vehicle Serie
Engine
Latest Products
- VICTRON Phonix Inverter 12 2000 230V Smart
Bluetooth built in: fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut off and restart levels
Dynamic cut off: load dependent cut off level
Output voltage: 210 245V
Frequency: 50 Hz or 60 Hz
ECO mode on off and ECO mode sense level
Alarm relay
Availability: Out Of Stock
340.000 KWD
- CLEARVIEW Land Cruiser 200 Next GEN Mirrors Black Full Option
Next Gen Towing Mirrors -
Sleeker, Smarter, Safe
It took just 4 years to bring the Next Gen Towing Mirror series to life. After over 13 years in the business we thought it was time to look at introducing a new style of towing mirrors.
The Next Gen is a smaller mirror which sits on a double slide and slides right back into the vehicle when not towing just like an OEM mirror. When you hook your van up you simply slide the mirror head out an impressive 180mm, giving the ultimate vision you need to keep you safe when towing.
Options for TOYOTA LANDCRUISER 200 SERIES
Chrome Cover - Ordered separately
Power-fold (if standard fitment)
BSM (Blind Side Management) (if standard fitment)
Standard Function
Electric
Black cover
Availability: In Stock
275.000 KWD
- Victron Energy Smart Battery Shunt 500-50
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
The SmartShunt is available in 500A. The 1000A and 2000A will follow later this year.
Availability: In Stock
61.000 KWD
- VICTRON SMART Smart Solar MPPT 100-50
These ultra-fast, Maximum Power Point Tracking (MPPT), solar charge controllers are Bluetooth accessible via either built in Bluetooth or the Victron Energy Bluetooth dongle. Utilising the free VictronConnect app many parameters can be viewed and set, such as battery voltage, solar history, load output, flexible battery charge algorithms plus day/night timing and light dimming options. These advanced MPPTs also include Advanced Maximum Power Point Detection in case of partial shading conditions.
Availability: In Stock
135.000 KWD
- VICTRON SMART SOLAR MPPT 100-20
Smart Solar MPPT 75/10, 75/15, 100/15 & 100/20
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
Models
75/10, 75/15, 100/15 & 100/20 (12/24V)
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Load output
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery..
Availability: In Stock
66.000 KWD
- VICTRON Smart Solar MPPT 75-15
Smart Solar MPPT 75/10, 75/15, 100/15 & 100/20
A solar charger gathers energy from your solar panels and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
Models
75/10, 75/15, 100/15 & 100/20 (12/24V)
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations – even when there is no internet connection or phone signal nearby – you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Load output
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load – thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't – during periods of poor weather – it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Availability: In Stock
57.000 KWD
- Victron Energy Solar Splitter Pair
Solar splitter pair MC4-Y, 1x M-2F / 1xF-2M
Availability: In Stock
12.000 KWD
- Victron Energy Smart Battery Sense Longe Range
Smart Battery Sense
Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers.
With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.
Improves battery charging
By measuring voltage at the battery bank terminals, errors arising from voltage-loss due to cable resistance are avoided - guaranteeing the correct charge-voltage.
For lead batteries, battery temperature data is used to adjust the charge-voltages: cold batteries require an increased charge-voltage, whereas hot batteries require a decreased charge-voltage. For lithium batteries temperature data is used to disable charging when they are too cold: charging lithium batteries near or below freezing causes permanent damage to the cells.
Look no wires
The connection between Smart Battery Sense and one or more Solar Charger(s) is wireless: It uses VE.Smart Network - a wireless technology based on Bluetooth Smart.
Information transmitted can be used simultaneously by one, two or more Solar Chargers connected to the same 12V, 24V and 48V battery bank. The Smart Network is set up using the VictronConnect app.
Tidy, simple - smart
Installation is simple, quick and tidy. Just connect the unit's two eyelets to your battery terminals and attach the Smart Battery Sense unit directly onto the battery-body using its self-adhesive strip.
Availability: In Stock
17.000 KWD
- Victron Energy Phoenix Inverter 12-3000 230V Smart
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing. Models are available in 1600VA, 2000VA and 3000VA for 12, 24 or 48V systems.
It's powerful enough to supply most common plug in appliances in your car, boat, caravan or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Availability: In Stock
405.000 KWD
- Victron Energy Orion-TR Smart 12 or v12-30A DC-DC
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries. Models are available up to 400W and unlimited multiple units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55C with a full rated output up to 40C
Availability: In Stock
105.000 KWD
- Victron Energy Smart Battery Protect 12 or 24V-100A
The Smart BatteryProtect disconnects the battery from the less important loads before it is completely discharged (which would damage it) or before it has run out of power to start the engine.
By using Bluetooth to program the Smart BatteryProtect, you can set all required on / off thresholds. Alternatively, one of nine pre-set on / off thresholds can be set using the programming pin (see manual).
If necessary, the Bluetooth function can be switched off.
Availability: In Stock
39.000 KWD
- Victron Energy Smart Battery Protect12 or 24V-65A
The Smart Battery Protect disconnects the battery from the less important loads before it is completely discharged (which would damage it) or before it has run out of power to start the engine.
By using Bluetooth to program the Smart BatteryProtect, you can set all required on / off thresholds. Alternatively, one of nine pre-set on / off thresholds can be set using the programming pin (see manual).
If necessary, the Bluetooth function can be switched off.
Availability: In Stock
30.000 KWD